Power Saver Lite
Power Saver Lite is an energy saving device which operates by reducing the voltage to a lighting load thereby reducing the power consumed. It cuts energy bills by up to 30% with only a 15% reduction in light output (NATA accredited laboratory test results).
Power Saver Lite is designed for use in commercial, retail, educational, warehousing and hospital installations where it is impractical to switch off a load completely during working hours. It is connected in series with the switched load so no commissioning is needed and can be used in conjunction with other lighting controls to further increase savings.
Lamp life is maintained by ensuring full voltage at start-up. If it is inappropriate to reduce light output, Power Saver Lite can often be used in conjunction with widely available replacement fluorescent lamps to produce the same energy savings and no reduction in light levels.
The Power Saver Lite energy controller for discharge lamp lighting operates at full power for an initial startup period of 5 minutes. This facilitates striking of the lamp and stabilisation of discharge lamp light levels.
Unlike other devices, Power Saver Lite is designed to be installed in the switched line of the controlled load rather than at the distribution board and is therefore unaffected by switching of adjacent loads.
The Power Saver Lite with control of individual circuits has a number of significant benefits:
• extremely simple and inexpensive to install.
• no generated harmonic distortion.
• unaffected by future modifications to the distribution board.
• no system wide failure under fault conditions.
• Fail Safe’ operation.
• Australian Designed and Manufactured
• One year warrantee
Model Range
Power Saver Lite comes in three models;
PSL2.4 2400 VA 5.5kg AU$479*
PSL3.0 3000 VA 6kg AU$589*
PSL5.0 5000 VA 7.5kg AU$699*
Download a brocure from the right hand panel under 'Brochures'.
*All prices in Australian Dollars and exclude GST and Delivery.
Minimum order quantities apply.
Contact us using the enquiry form to confirm pricing and availability.
|
